The "PL" system is a great combination for all brushed and sprayed finishes that dry to a hard finish.

This awesome new wheel and compound set is just what you need to polish those brush and spray finishes that are so hard to get right when applying the last coat.
It just seems that no matter how hard you try there is always a little orange peel or some brush marks in that finish.

The "PL" Buffing system will easily buff those problems out and give you that glass finish you have been looking for.

This system is designed for use at low RPMs on your lathe.  The combination of low surface speed on the face of the wheel and our "PL" compound keep the friction down.  Less friction, less heat.  Heat will soften the finishes and ruin them.  With our system you can achieve a beautiful gloss or satin finish in just minutes.

You will thrilled to see how "PL" works on plastics and acrylics.  Use it on face shields.  Just buff the shield with the "PL" wheel and compound and then buff with the carnauba wax and wheel.  The carnauba wax will leave a little film on the surface so just wipe it off with a soft cloth and it should be good as new.
James Johnson of Texas wrote me and said he had used it to buff out the headlight covers on his car.